Pattern effect commands
When you enter an effect number in the pattern editor, a reference of the given
effect appears in program status bar. You don't have to remember any of these
effects - simply move the effect slider with your right mouse button and the
effect values are being recorded automatically into the current effect row.
Holding down left shift button while moving the effect slider with your right
mouse button will record values to the Track Envelopes.
Effect row assignments
Insert desired effect value instead of x or y.
00 |
xy |
Arpeggio |
(x=base note offset 1, y=base note offset 2) |
01 |
xx |
Pitch slide up |
(speed 00-FF) |
02 |
xx |
Pitch slide down |
(speed 00-FF) |
03 |
xx |
Set volume |
(volume 00-FF) |
04 |
xy |
Volume slicer |
(x=sliced volume - 0 (silent) - F (full volume), y=tick when to begin slicing 0-5) |
05 |
xx |
Glide to note |
(speed 00-FF) |
06 |
xx |
Volume slide up |
(speed 00-64) - 64 x 0601 slides from silence to full volume |
07 |
xx |
Volume slide down |
64 x 0701 slides from full volume to silence |
08 |
xx |
Set panning |
(position 00-FF) - 80=Center |
09 |
xx |
Sample Offset |
(offset position 00-FF) - 00=sample start, FF=sample end |
0A |
xx |
Surround width |
(width 00-FF) |
0B |
xx |
Play Sample backwards |
(00=backward; 01=play Sample forward at any position, not only when triggering) - also B0 and B1 in panning row |
0C |
xx |
Set Track Volume |
(volume 00-FF) |
0D |
xx |
Delay Note xx ticks |
(ticks 00-05) - also Dx in panning row |
0E |
xy |
Retrigger Note every xy Ticks |
(y=ticks 0-5) - also Ex in panning row)
The first digit sets the volume of the retriggered sample. Value effects on volume for each retrig are:
- 0 No change
- 1 -1
- 2 -2
- 3 -4
- 4 -8
- 5 -16
- 6 *2/3
- 7 *1/2
- 8 No change
- 9 +1
- A +2
- B +4
- C +8
- D +16
- E *3/2
- F *2
|
0F |
xy |
Vibrato |
(x=speed 0-F, y=depth 0-F) |
F0 |
xx |
Set BPM |
(BPM 20-FF) |
F1 |
xx |
Set Speed |
(speed 01-0A) |
F2 |
xx |
Set Track Routing |
(00-available stereo channels) |
FB |
00 |
Pattern Break |
|
FC |
xx |
Set Master Volume |
(volume 00-FF) |
FD |
xx |
Delay Pattern xx ticks |
(ticks 00-05) |
FF |
00 |
Stop all Notes and Effects |
|
Effect row assignments
Once you add an Effect to track it has a certain order in the Effect list. The Effect Number depends on that order.
10 - EF |
XX |
Effects in Effect list |
For example:
10 |
04 |
Effect 1 Parameter 1=4 |
11 |
03 |
Effect 2 Parameter 2=3 |
20 |
07 |
Effect 2 Parameter 1=7 |
To bypass an effect in Effect list (turn in on/off):
xF |
00 |
Turn effect x on |
(x=effect number in list 1-E) |
xF |
01 |
Turn effect x off (bypass=on) |
(x=effect number in list 1-E) |
Volume row
00-40 |
Set volume |
|
9x |
Volume slide up |
(x=speed 0-F) |
Ax |
Volume slide down |
(x=speed 0-F) |
Fx |
Note cut after x ticks |
(x=ticks 0-5) |
Panning row
00-80 |
Set panning position |
(position 00=Left, 40=Center, 80=Right) |
9x |
Panning slide left |
(x=speed 0-F) |
Ax |
Panning slide right |
(x=speed 0-F) |
Bx |
Play sample backward |
(x=0-backwards; 1-forward at any position) |
Dx |
Delay note |
(x=ticks 0-5) |
Ex |
Ex Retrigger note |
(x=ticks 0-5) |
Panning row MIDI / VSTi commands
90 |
Send CC Change |
Value in the effect-row |
91 |
Pitchbend |
Value in the effect-row |
92 |
Program change |
Value in the effect-row |
Back to the top!
